Description

DANFOSS DIGITAL TEMPERATURE THERMOSTAT REPI

Specification : Set temperature range: 0 – 99.5℃ adjustable

Accuracy displayed: 0.1℃

Accuracy: ±0.5℃

Rated Power: < 1 W

Sensor type: NTC

Display: LCD

Operations: Input Control

Power: AC 24V±10％, 50Hz/60Hz

Output signal: AC 24V×2 (0.5A resistive) , 0 – 10VDC(5mA) / 4 – 20mA (600Ω)

Input signal: dry contact (NO)

Dimensions: 86×86×23mm (W×H×D)

Fixing screw width : 60mm (Standard)

On/Off: Press “ ” buttons to turn on; press “ ” again to turn off.

Setpoint: With thermostat on, press “” to reduce the setpoint, press “ ” to increase the setpoint, the setpoint step is
0.5℃, the setpoint will be confirmed automatically after 5 seconds, and then return to dispay status, press “
” or “ ” to check setpoint.

Mode: With thermostat on, press “ ” to change the working mode – Cooling “ ”， Heating “ ”, Vent ” “, Auto “ ” ( Auto is available REPI-4/ REPI-4N).

Fan Speed: With thermostat on, press “ ” to select the desired speed – low speed “ ”, Med speed “ ”, High speed
“ ”, auto “ ”. If single speed fan available, there’s only med speed “ ”.

Under auto speed fan, the fan speed will be changed automatically as below: in low speed when room temperature
is 1℃ difference with set point;in med speed when room temperature is 2 difference with setpoint℃ ; in High speed when
room temperature is 3 difference with set point. ℃