HONEYWELL D06F PRESSURE REDUCING VALVE

Description

HONEYWELL D06F PRESSURE REDUCING VALVE

Pressure reducing valve with balanced seat Standard pattern with set point scale

Application

D06F pressure reducing valves protect household water installations against excessive pressure from the supply. They can also be used for industrial or commercial applications within the range of their specification. By installing a pressure reducing valve, pressurisation damage is avoided and water consumption is reduced. The set pressure is also maintained constant, even when there is wide inlet pressure fluctuation. Reduction of the operating pressure and maintaining it at a
constant level minimizes flow noise in the installation.

Special Features

• DVGW approved
• Up to size 1 1/4″ approved for low noise, Group 1 without limitations
• The outlet pressure is set by turning the adjustment knob
• The set pressure is directly indicated on the set point scale
• The adjustment spring is not in contact with the potable water
• The valve insert is of high quality synthetic material and can be fully exchanged
• Integral fine filter
• Also available without fittings
• Easily retrofittable to convert valve to a reverse-rinsing filter combination
• Can be retrofitted with an inlet non-return valve
• Inlet pressure balancing – fluctuating inlet pressure does not influence outlet pressure
• Reliable and proven in millions of applications
• Light weight
• Has the capability to regulate “near zero” and no flow conditions equally good, completely eliminates the need for a low flow bypass valve.

Range of Application

Medium Water and other non-aggressive liquids, compressed air* and nitrogen*
Inlet pressure Maximum 25.0 bar
Outlet pressure 1.5 – 6.0 bar

Technical Data

Operating temperature Maximum 40 °C with clear filter bowl Maximum 70 °C with brass filter bowl
Minimum pressure drop 1.0 bar
Connection sizes 1/2″ – 2″